Hemline Gold Thread Snips 13cm
Rated 2 out of
5
by
Wednesday woman from
Disappointed
These are a disappointment. I spent a little more to get the best but they only seem to work if I'm VERY careful how I hold them and in any case, I can't snip through layers of material e.g. Pattern markings/notches. Will sometimes cut sewing thread.
Date published: 2024-06-02
Rated 4 out of
5
by
Kadbury2 from
Unsure if worth the money.
I picked this one over the cheaper because of the safety cap, not only am I clumsy but have kids too. It’s cuts the thread. But sometimes I have to snip twice. Not a major problem but frustrating when your on a roll and getting lots done.
Date published: 2021-11-24
Rated 1 out of
5
by
GEORGE68 from
Waste of money dint work
I bought these about 2 weeks ago, they cut about 2 times out if 10. I chose them even though they were more expensive as I thought they looked more robust and would last. Very disappointing.
Date published: 2024-09-21
Rated 1 out of
5
by
Karen Doubleyou from
Not up to the job
I bought these for some quick and easy snipping but they couldn't do the job that I wanted. I returned them and bought some others which were recommended by the lovely assistant.
Date published: 2024-01-07
Rated 2 out of
5
by
leather lad from
dull as dish walter
got them from the cardiff store. after trying to use them i found out that thay are too bulky and thay chopsticks are sharper than there's
Date published: 2024-01-10
Rated 4 out of
5
by
Anonymous from
Great, if you use them properly...
Good and sharp, but you need to make sure you're pushing the blades against each other. Once you get used to that, they're great.
Date published: 2024-07-07
Rated 4 out of
5
by
TheCriticalMass from
Not perfect but good for most uses.
Hasn't stayed as sharp as new. They were really sharp at first but sometimes require a double snip now.
Date published: 2023-02-16
Rated 2 out of
5
by
Nana Jules from
Thread Snips
Not very sharp , I've had better from market, I find you need to snip thread at an angle
Date published: 2023-06-20
