Pillar Candle Making Mould
Rated 2 out of
5
by
Kay789 from
Novice: couldn't remove candle
Pro: the mould is sturdy
Cons: its difficult to pass the wick through if your using one with a metal base as you have to thread it down through the inside of the tall mould.
I could not remove my candle which was irritating because I spent hours layering it up... it simply wouldn't budge: I tried freezing it, tapping it, pulling the wick, heating the outside to lightly melt the stuck wax, in the end I had to dig it out and melt it all down and use a different mould (losing the layered colours). Very disappointing.
I used soya wax: I don't know if this is why I had this problem?
Date published: 2018-12-27
Rated 4 out of
5
by
Shelley from
Does exactly what you need
I brought this to make pillar candles, and that’s exactly what it does. If I could offer one negative it would be there are no instructions on it, I had to find out the hard way that you need to oil the inside of the mould to be able to get the candle out once it had set.
Might be worth sharing a few hints on the packaging for first time candle makers like myself
Date published: 2021-11-20
Rated 5 out of
5
by
Lacewing from
Brilliant Candle Mould
I've only made one candle so far, but it was perfect. The only issue I had was getting the wick through the hole as I had it threaded through a wick needle. I got it through though and I'm absolutely delighted with the results!
Would recommend.
Date published: 2017-09-08
Rated 5 out of
5
by
Willow18 from
Excellent product
Makes a beautiful pillar candle easy to use so good that I bought a second one
Date published: 2017-10-30
Rated 5 out of
5
by
Bren93 from
Excellent
Worked really well, and easy to remove the finished candle. I wish it were available in other sizes though, and that there was a wider selection of candle making materials in store.
Date published: 2021-05-08
Rated 4 out of
5
by
Richie17 from
Very good
Good design and candle slid out of mould the next day no problem
Date published: 2021-03-06
Rated 5 out of
5
by
Madams from
Candle Mould
First time using a mould to re-set oddments of candles left from my sons wedding. Results were pleasing although they didn't slide out as easily after the first couple of uses. Some time spent in the freezer resolved this.
I am now planning to make my advent candle.
Date published: 2023-10-10
Rated 5 out of
5
by
Sbuck38 from
Easy to use
Great product. Very easy to use with one pour paraffin wax. I heated the product up in some warm water before I poured the wax to minimise any air bubbles. Because it's clear you can see what is happening with the wax as soon as you use it.
Date published: 2020-02-22